Page
1 - 2

Applications

  • Landscaping

  • Agriculture

  • Nurseries

Features

  • Self-cleaning

  • Built-in filter slits and raised inlet to minimize clogging

  • Silicone diaphragm

  • Outstanding emission uniformity

  • Dual, 180° apart, water outlet holes

  • Emitters color coded for easy flow rate identification

  • Wide variety of spacings available

  • UV stabilized

  • Available in black, brown or purple

Specifications

  • Pressure compensating from 10 to 60 psi

  • 1/2, 1 or 2 gph flow rates available

  • Tubing size of .600" ID x .700" OD, wall = .050" and .550" ID x .640" OD, wall = .045"

  • Bending radius of 7"

  • 100', 500' or 1000' coils available

  • Recommended filtration (140 mesh for 1/2 gph, 120 mesh for 1 gph, and 80 mesh for 2 gph emitter)

  • Emitters are color coded, 1/2 gph (red), 1 gph (yellow), 2 gph (purple)

Coils are available in 1000', 500' and 100' lengths. DURA-FLO™ PC is a fully pressure compensating dripperline and is available in black, brown or purple (to indicate waste or reclaimed water).

The drip emitter is permanently bonded to the inside of the tubing during the extrusion process.		 The DURA-FLO™ PC drip emitter is designed to be clog-free. It has a raised inlet and narrow filter slits to prevent large particles from entering the emitter. In addition, it is self-cleaning. If dirt were to enter the emitter, the diaphragm relaxes to initiate a flush cycle to allow the debris to flush out.

100' coils are neatly coiled, tagged and shipped in cardboard boxes.

Page 2 --->